(RETURN TO ONLINE CATALOG)

(RETURN TO OPEN HOUSE PRODUCTS)

 

Telephone & Video Distribution

OpenHouse systems feature internal PCB splitters - Our telephone and video distribution splitters are inherently more stable and higher performing than competitive units thanks to their internal printed circuit board design.  The internal PCB ground plane also significantly reduces spurious noise.

Model H801 Combination Hub

Telephone service for two lines to six locations.
110 punch-down connectors.
Can be mounted upside-down.
Distributes CATV/antenna to four TVs.
Six enclosure grid spaces.
Dimensions: 6.25" x 1" x 2.75"

Model H802 Combination Hub

Telephone service for four lines to six locations.
110 punch-down connectors.
Can be mounted upside-down.
Distributes CATV/antenna to four TVs.
Six enclosure grid spaces.
Dimensions: 6.25" x 1" x 2.75"
   

Model H03 Splitter/Combiner Hub

3-way balanced splitter, 5-1000 MHz.
-130 dB RFI rejection.
Vertical alignment.
Tilted 10 degrees for easy connections.
Six enclosure grid spaces.
Dimensions: 6.25" x 1" x 2.75".

Model H804 Splitter/Combiner Hub

4-way balanced splitter, 5-1000MHz.
-130 dB RFI rejection.
Vertical alignment.
Tilted 10 degrees for easy connections.
Six enclosure grid spaces.
Dimensions: 6.25" x 1" x 2.75".
   
   
   

Model H806 Splitter Hub

6-way balanced splitter, 5-1000MHz.
-130 dB RFI rejection.
Vertical alignment.
Five enclosure grid spaces.
Dimensions: 6.25" x 2.25" x 2.25".

Model H808 Splitter Hub

8-way balanced splitter, 5-1000 MHz.
-130 dB RFI rejection.
Vertical alignement.
Five enclosure grid spaces.
Dimensions: 6.25" x 2.25" x 2.25".
   

 

IR Control

It is easy to incorporate infrared remote control into video distribution systems that combine telephone distribution.  OpenHouse offers a variety of IR targets, emitters, couplers, and connectors. 

H933 IR 5-Volt Target

Set-top target 5-volt IR.
Use with H838 series distribution amplifiers.
Dual F connectors modulators.

2181 IR Coupler

Allows IR control over multiple H838s.
Compact in-line design.
Use one 2181 for each additional H838.
Supports 5-volt IR.
   
   
   

H973 IR Emitter

Single head with adhesive back.
5' cord with stereo mini plug.
Use with H56x and 5500 series modulators.

2184 IR Connector

Connects directly to H838.
Allows for local IR in enclosure.
Four emitter jacks.
One power jack.
One four-wire target terminal.

 

To place your order please call

(919) 734-3221 or (800) 672-4708