EC500

ExStik II Waterproof pH/Conductivity Meter

Combination rugged flat surface pH electrode with autoranging high accuracy Conductivity cell measures Conductivity, TDS, Salinity, pH, and Temperature

Features:  9 units of measure:  pH, us, ms, ppm, ppt, mg/L, g/L, degrees C, and degrees F; analog batgraph indicates trends; internal memory stores up to 25 labeled readings for easy recall; adjustable Conductivity to TDS ratio from 0.4 to 1.0; 0.5 fixed Salinity ratio; RENEW feature warns to check calibration, but allows continued use; Data Hold, Auto Power Off, Low battery indicator, waterproof to IP67; complete with electrode, protective sensor cap, sample cup with cap, polishing paper, four 1.5V SR44W batteries, and 48" neckstrap.  Order Conductivity standards separately.   Dimensions:  1.4" x 7.3" x 1.6".  Weight:  3.8 oz.

DO600

ExStik II Waterproof Dissolved Oxygen Meter

Easy to replace screw on membrane cap with optional extension cables

Features:  Oxygen level displayed as % Saturation or Concentration (mg/L [ppm]); adjustable Salinity Compensation fro 0 to 50 ppt; analog bargraph indicates trends; memory stores up to 25 data sets with DO and Temperature readings; self calibration on power up; Data Hold, Auto Power Off, Low battery indicator; waterproof to IP67; complete with DO electrode, protective sensor cap, spare membrane cap, electrolyte, four 1.5V SR44W batteries, and 48" neckstrap.  Optional 3 ft or 16 ft extension cables are available.   Dimensions:  1.4" x 6.9" x 1.6".     Weight:  3.8 oz.

DO610

ExStik II DO/pH/conductivity Kit

User friendly kit economically measures 6 parameters supporting water, wastewater, groundwater, aquaculture and fisheries professionals

Kit includes:  EC500 pH/Conductivity ExStik II meter with combination high accuracy multi-ranging Conductivity sensor for Conductivity, TDS, Salinity, pH, and Temperature measurements; DO600 Dissolved Oxygen ExStik II meter with electrode, replacement membrane cap, electrolyte, and polishing paper. 

Accessories Included:  sample pH buffers--single use pouches for pH4, pH7, pH10, and rinse solution; weighted base with 2 cups and caps, 1.5V SR44W batteries and neckstrap with each meter, and carrying case. 

ExStik Kits

 Complete kit includes interchangeable electrodes to measure chlorine, pH, ORP, and temperature

Expand the capabilities of your chlorine meter by purchasing EX900 4-in-1 kit which includes chlorine meter with interchangeable modules for pH and for ORP to give you a complete water testing kit.

Model EX800 3-in-1 kit is without ORP electrode.

Kits include:  CL200 Clorine ExStik, flat surface pH elctrode with cap, flat surface ORP electrode with cap (EX900 kit only); ExTab reagent tablets (50 tests); pH 4, 7, & 10 buffer solutions(20mL) and rinse solution, weighted base with 56 samples plastic cups and caps; four 1.5V batteries; 48" neckstrap; carrying case with individual compartments and elastic strap to secure your meter(s), accessories, and manual in place.  Dimensions:  9.5" x 6.8" x 2.8".  Weight:  1.68 lbs.