|
(RETURN
TO ONLINE CATALOG)
(RETURN TO
EXTECH INSTRUMENTS)
ExSTIK
CHLORINE METER & ACCSSORIES
Designed as a simple method to test for Total Chlorine following "Standard
Methods for Examination of Water and Waste Water" (4500-CI I; approved by the
EPA as an acceptable alternative method for 40 CFR Part 136 wastewater
compliance monitoring
|
 |
CL200
ExStik
Chlorine Meter
Direct
reading of Total chlorine down to 0.01ppm and is unaffected by color or
Turbidity of the sample
Features:
Direct reading of Total Chlorine provides fast and easy measurements; low
detection limit down to 0.01 ppm; wide dynamic range to 10ppm (use dilution
method for 10 to 50 ppm); unaffected by sample color or turbidity; automatic
electronic calibration; memory stores 15 labeled readings; unique flat
surface chlorine electrode eliminates any concerns for clogged junctions or
glass breakage; large LCD simultaneously displays ppm of Total Chlorine,
Temperature, and analog bargraph indicator; waterproof to IP67; complete
with meter and flat surface Chlorine electrode, EXTab reagent tablets (50
tests), protective sensor cap, sample cup wit cap, four 1.5V button
batteries, and 48" neckstrap. Dimensions: 1.4" x 6.8" x
1.6". Weight: 3.85 oz.
|
|
 |
EC500
ExStik II
Waterproof pH/Conductivity Meter
Combination rugged flat surface pH electrode with autoranging high accuracy
Conductivity cell measures Conductivity, TDS, Salinity, pH, and Temperature
Features:
9 units of measure: pH, us, ms, ppm, ppt, mg/L, g/L, degrees C, and
degrees F; analog batgraph indicates trends; internal memory stores up to 25
labeled readings for easy recall; adjustable Conductivity to TDS ratio from
0.4 to 1.0; 0.5 fixed Salinity ratio; RENEW feature warns to check
calibration, but allows continued use; Data Hold, Auto Power Off, Low
battery indicator, waterproof to IP67; complete with electrode, protective
sensor cap, sample cup with cap, polishing paper, four 1.5V SR44W batteries,
and 48" neckstrap. Order Conductivity standards separately. Dimensions: 1.4" x
7.3" x
1.6". Weight: 3.8 oz.
|
 |
DO600
ExStik II
Waterproof Dissolved Oxygen Meter
Easy to
replace screw on membrane cap with optional extension cables
Features:
Oxygen level displayed as % Saturation or Concentration (mg/L [ppm]);
adjustable Salinity Compensation fro 0 to 50 ppt; analog bargraph indicates
trends; memory stores up to 25 data sets with DO and Temperature readings;
self calibration on power up; Data Hold, Auto Power Off, Low battery
indicator; waterproof to IP67; complete with DO electrode, protective sensor
cap, spare membrane cap, electrolyte, four 1.5V SR44W batteries, and 48"
neckstrap. Optional 3 ft or 16 ft extension cables are available.
Dimensions: 1.4" x 6.9" x 1.6". Weight:
3.8 oz.
|
 |
DO610
ExStik II
DO/pH/conductivity Kit
User
friendly kit economically measures 6 parameters supporting water,
wastewater, groundwater, aquaculture and fisheries professionals
Kit includes:
EC500 pH/Conductivity ExStik II meter with combination high accuracy
multi-ranging Conductivity sensor for Conductivity, TDS, Salinity, pH, and
Temperature measurements; DO600 Dissolved Oxygen ExStik II meter with
electrode, replacement membrane cap, electrolyte, and polishing paper.
Accessories
Included: sample pH buffers--single use pouches for pH4, pH7, pH10,
and rinse solution; weighted base with 2 cups and caps, 1.5V SR44W batteries
and neckstrap with each meter, and carrying case.
|
To place your order please call
(919) 734-3221 or (800) 672-4708
|
