Part Number  -  400-008

LAN Tester with Remote

-Tests matched pairs

-4 LEDs on Remote only

-Checks in loopback or installed/remote mode

-Test shielded and unshielded twisted pair cables (STP/UTP)

-Coax terminator included for remote testing

LAN Tester with Remote

-Tests individual wires

-8 LEDs on each unit

-Checks in loopback or installed/remote mode

-Test shielded and unshielded twisted pair cables (STP/UTP)

-Coax terminator included for remote testing

LAN Cable Tester with Remote

Economy LAN Cable Tester with Remote

-Check in loopback or installed/remote mode

-Tests shielded and unshielded twisted pair cable (STP/UTP)

Economy Telecom Tester

-Plug into jack - test immediately

-Red light - reversed polarity

-Amber light - AC voltage present on line

-Green light - circuit OK

Mini-LAN Tester

-Used for verifying and troubleshooting networks

-Press test button and it displays status of line

Cable Sniffer with Remote

-Tests RJ45 CAT5, USB, and BNC

-5 LEDs

-Performs tests of shorts and opens

LANid

-Essential tool for installing and debugging LANs

-Push one button to display Device Status and Speed (10 or 100 BaseT)

-Contains a tone generator to trace cables that generate no link status

-Compact pen style design

-Ethernet standard Auto-negotiation technique to determine speed

PC Cable Tester without USB Connectors

-Tests most common PC and network related cables for opens, shorts, and pin-to-pin connections

-Automatic/variable speed scan mode

-Operates on external 9VDC adaptor (not included)

-Enhanced LED glow for shorted printer cable test

-Connector types include:  36 pin Centronics; 9, 15 & 25 pin D-Subminiature; 15 pin high density D-Sub; BNC; 8P8C RJ45 modular jack (shielded)

Part Number  -  400-007

PC Cable Tester with USB Connectors

Includes items listed above and USB (A) & USB (B) and 1394 Connectors

Multimeter

-AC/DC voltage up to 600V

-DC current up to 10A

-Resistance 200-2M ohms

-hFE: 1-1000

-Diode test

-Data hold

Tone Generator and Probe Set

Professional Multimeter

-32 ranges

-DC voltage: 200mV/2/20/200V +/- 0.5%, 1000V +/- 0.8%

-AC voltage: 200mV +/- 1.2%, 2/20/200V +/-0.8%, 700V +/-1.2%

-DC current: 20uA +/- 2%, 200uA/2mA/20mA +/- 0.8%, 200mA/2A +/- 1.5%, 10A +/- 2%

-AC current: 200uA/200mA/2A +/- 1.8%, 2mA/20mA +/- 1.0%, 10A +/- 3%

-Resistance:  200/2K/20K/200K/2M ohm +/- 0.8%, 20M ohm +/- 1.0%, 200M ohm +/- 5%

-Continuity checking with buzzer

-Diode check:  test current 1.0mA, test voltage 2.8V

-hFE: 1~1000

Clamp-On Current Probe

-SMT Technology

-Digital and analog display

-3999 counts and 42 segment bar graph

-9mm high digits

-DC voltage:  400V/600V +/- 1.0%

-AC voltage:  400V/600V +/- 1.5%

-AC current:  40A/400A +/- 2%

-Maximum cable diameter 1.1"

-Resistance:  400 Ohms +/- 1.0%

-Data holt

-Continuity test

-Auto/manual ranging

-Backlight